YOUSU PETG carbon fiber filament 1kg 1.75mm filament Black color less stringing better adhesion 3d
YOUSU PETG-CF is a material that made of PETG filament infused with Carbon Fibre. It is characterized by higher strength and rigidity than conventional PETG. It is ideal for mechanical components and has a beautiful matte surface. The printed parts has the advantage of toughness as PETG and also can be damp proof after printing, can be used as water tubes for machines with good resistance of impactness.
YOUSU PETG-CF advantage:
+Superior chemical resistance vs. ABS
+Amorphous structure giving it low, near isotropic shrinkage
+Low moisture absorption, 3x lower than ABS
+Very low odor while printing
+Wide processing range from 220-260°C
Chemical Resistance of PETG:
Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.
【What Is It Good For?】
Ideal for any applications which require light weight and rigidity.
Carbon fiber reinforced parts, designed to use less material and save weight, is extremely popular in aerospace, civil engineering, the military, and motorsports.
Printing Notes：
YOUSU PETG-CF 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid moisture. Also, we advice use closed box printer which can have constant temperature control system is better.
Printing Notes：
YOUSU PETG-CF 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid moisture. Also, we advice use closed box printer which can have constant temperature control system is better.
What makes YOUSU PETG-CF different from standard PETG?
YOUSU PETG-CF is enhanced with carbon fiber, which significantly improves its mechanical strength, stiffness, and thermal properties compared to standard PETG. The addition of carbon fiber also reduces the material’s shrinkage during cooling, leading to more dimensionally stable parts that are crucial in precision applications.
In which industries is YOUSU PETG-CF most beneficial and why?
YOUSU PETG-CF is particularly beneficial in industries where high strength, lightweight, and durable materials are crucial, such as:
Automotive: For manufacturing parts that need to withstand mechanical stress and high temperatures.
Aerospace: For components that require high strength-to-weight ratios and thermal stability.
Consumer Electronics: For creating robust and durable casings and structural components that are also lightweight.
What are the main challenges faced when working with YOUSU PETG-CF?
Processing Requirements: YOUSU PETG-CF requires specific processing conditions, such as higher extruder temperatures and slower cooling rates, to maintain the integrity of the carbon fibers and the matrix.
Equipment Wear: The abrasive nature of carbon fibers can lead to increased wear and tear on processing equipment, such as extruders and nozzles, requiring more frequent maintenance or the use of specialized equipment.
Cost: While offering superior properties, YOUSU PETG-CF can be more expensive than standard PETG, impacting its adoption in cost-sensitive applications.
carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.carbon fiber 3D FILAMENT, as a composite and abrasive filament, carbon fiber filaments will destroy your standard
brass nozzles. The carbon fibers are tougher than the brass, and will decimate it in no time at all. Therefore, for carbon fiber 3D
printing, you’ll need either a hardened steel nozzle, or even a ruby-tipped nozzle. We advice use 0.6mm or bigger nozzle.
Before printing, no matter it is new openned or not, we advice to dry it at the temperture of 50-60℃ about 6-8 hours to avoid
moisture. Also, we advice use closed box printer which can have constant temperature control system is better.
About YOUSU 3D
Yousu 3D is a professional manufacturer who focus on 3D printing filament, 3D resin and 3D pen.Our product linecovers consumer level to professional level market. For filament from PLA to PEEK,for 3d resin from water washable todental and casting resin, for 3d pen from normal 3d pen to world first one candy pen.
As an ISO 9001 certificated company all products are under good quality control. As a social responsibility all behaviormeets BSCI requirement. We are proud of our R&D, more than 20 patents including 3 invent patents and we can do
ODM/OEM business.
