YOUSU 3D will bring several new products at 2022 TCT Asia
TCT Asia will be hold in Shenzhen BaoAn expo from 31st Aug to 2nd Sep. As one of the leading 3d manufacturer, YOUSU 3D will act as an exhibitor
to join this show.
This time, YOUSU 3D will take series of 3d filament, 3D resin and 3d pen to the show. Some new products will be displayed there. Here we list
some of them in this topic.
Dual color resin.
Wow wow wow, can you imagine that in the 3d resin, there are two colors combine together and they will not mix? That’s our new technology. The
printed parts also will indicate two different colors from different angle will have different color. For more details you can click Dual color resin.
PP filament
We will take our functional 3d pp filament to the booth. PP filament are good for functional parts due to its chemical resistance, good layer bonding
etc. advantages. We solved its warping issue after our R&D department’s hard work. Here is the printing parts with our PP filament.
3 Triple color filament
Triple color PLA filament combines 3 different colors within the same filament thread. The printed models will also show 3 different colors while
viewing from different angle. It's very good for priting visual objects.
4 Conductive Filament
Conductive filament means the filament can be conductive. 1.75mm diameter filament with 10cm length, the resistance is around 10000 ohms.
5 405nm SLA resin
Most of SLA resin are based on 365nm technology. If SLA equipment supplier can change laser wavelength from 365nm to 405nm,the whole
cost of the machine will be much cheaper. But the difficulty is the resin material. Our 405nm SLA resin overcome the shrinkage issue and the
softness of the supporting parts. Can be well used on 405nm SLA machine.
You are welcome to visit our booth to understand more details about these products and get the whole catalog of our products. If unfortunately you
can not join our show, you are welcome to send email to us via sales@ysfilament.com.
to join this show.
This time, YOUSU 3D will take series of 3d filament, 3D resin and 3d pen to the show. Some new products will be displayed there. Here we list
some of them in this topic.
Dual color resin.
Wow wow wow, can you imagine that in the 3d resin, there are two colors combine together and they will not mix? That’s our new technology. The
printed parts also will indicate two different colors from different angle will have different color. For more details you can click Dual color resin.
 |
 |
PP filament
We will take our functional 3d pp filament to the booth. PP filament are good for functional parts due to its chemical resistance, good layer bonding
etc. advantages. We solved its warping issue after our R&D department’s hard work. Here is the printing parts with our PP filament.
3 Triple color filament
Triple color PLA filament combines 3 different colors within the same filament thread. The printed models will also show 3 different colors while
viewing from different angle. It's very good for priting visual objects.
4 Conductive Filament
Conductive filament means the filament can be conductive. 1.75mm diameter filament with 10cm length, the resistance is around 10000 ohms.
5 405nm SLA resin
Most of SLA resin are based on 365nm technology. If SLA equipment supplier can change laser wavelength from 365nm to 405nm,the whole
cost of the machine will be much cheaper. But the difficulty is the resin material. Our 405nm SLA resin overcome the shrinkage issue and the
softness of the supporting parts. Can be well used on 405nm SLA machine.
 |
 |
You are welcome to visit our booth to understand more details about these products and get the whole catalog of our products. If unfortunately you
can not join our show, you are welcome to send email to us via sales@ysfilament.com.
